If I agreed for the work to commence what should I expect to happen next?

We would book you in for a time and day convenient for yourself, then a day before the agreed date, we would contact you and would arrive on time when promised.

If I do decide to have a quote would I be charged?

No, there is no charge whats so ever on any given quote is totally free and no-obligation.

Does anybody need to be in for a quote?

Yes, but we do not need to come inside.

Will a quote take much of my time?

No, it all depends on the service you would require from us, what is needed is an external look at your property, a survey of the houses grounds for our health and safety check, and if we require ladders or scaffolds to do the work an average of 5-30 mins is needed.

How do I know I will be completely satisfied on completion of the work?

Unlike many company's we do not take any form of up-front deposits and no payments will be made till you as the customer ha completely checked over all the work and our 100% satisfied only then we take any form of payment.

How much does a mastic man charge per Metre?

£2.80/m to £3.90/m depending on height of work/access requirements. Contact us at 0161 284 0618 for more information!

What is the average cost of gutter cleaning?

On average, homeowners can expect to pay between £80 and £120 for gutter cleaning services in the UK. However, the cost can increase for larger or more complex properties, and some service providers may charge additional fees for services such as debris removal or gutter repair. Contact us at 0161 284 0618 for more information!

Is uPVC Spraying Cheaper Than Replacing My Windows?

Usually, yes. If you want cheap uPVC windows you can buy them for £150 each, but if you want very good quality then you can pay up to £800 or more. Therefore, if your original windows are good quality uPVC, then a repair is going to be much cheaper. Contct us for more information!

How much does Glass and Mirror Cleaning service cost?

On average, homeowners can expect to pay between £10 and £30 per hour for glass and mirror cleaning services in the UK. However, some service providers may charge a flat fee based on the number of windows or mirrors to be cleaned, which can range from £2 to £10 per pane. Contact us for more information!

How much does a power/pressure washing service cost?

The cost of a power/pressure washing service can vary depending on the size of the area to be cleaned, the type of surface, and the complexity of the cleaning. On average, homeowners can expect to pay between £80 and £200 for a power/pressure washing service in the UK. Contact us for more information!

How much does a Rooftop/Skylight Cleaning Service cost?

The cost of a Rooftop/Skylight Cleaning Service can vary depending on the size of the roof and skylights, the extent of the cleaning needed, and the location. On average, homeowners can expect to pay between £150 and £350 for a rooftop/skylight cleaning service. Contact us for more information!

How much does it cost to have a driveway professionally cleaned?

The cost of professional driveway cleaning depends on several factors, such as the size of the driveway, the type of cleaning method used, and the location of the property. On average, homeowners can expect to pay between £150 and £400 for a professional driveway cleaning service Contact us today for more information!

How much does it cost to clean interior and exterior windows?

On average, homeowners can expect to pay between £4 and £10 per window for interior and exterior cleaning. The price depends on the size and number of windows in your home. Contact us for more information!

Bathroom Sealant Services Manchester

You see it every day. The black line around the bath. The sealant that has cracked along the shower tray. The corner that has lifted and lets water sit behind it. It looks bad and it causes real damage if it is left too long. BrightWhite UPVC Cleaning Services removes old sealant fully and applies a clean fresh seal around baths, showers, tiles, wet rooms and basins. The bathroom looks right again and the water stays where it should.

Why Old Sealant Cannot Just Be Painted Over

A lot of people try to fix black sealant by putting a fresh layer on top of it. It looks better for a few weeks. Then the black starts coming back through. That is because the mould is not sitting on the surface. It is living inside the sealant and behind it, between the sealant and the wall.

New sealant laid over old does not bond properly either. The old surface is already dirty and breaking down. The new layer has nothing clean to grip onto. It starts to lift at the edges within weeks and the whole job needs doing again.

The only fix that lasts is taking the old sealant out completely. Clean the surface back to bare material. Let it dry fully. Then apply fresh sealant on a clean base. That is the difference between a repair that holds and one that fails quickly.

Our Bathroom Sealant Services

Every sealant joint in the bathroom is included in the service. Here is what each part of the service includes:

Bath Sealant Removal and Replacement

A bath moves slightly every time someone gets in or out. That movement works on the sealant over time and causes it to crack or pull away from the wall. We take out the old seal completely, clean the surface and apply a fresh bead that sits flush and moves with the bath rather than fighting it.

Shower Sealant Replacement

The corners and base of a shower are the first places sealant fails. Soap residue, moisture and daily use break it down faster than anywhere else. We remove the old material back to the bare surface, treat any mould residue and apply a clean seal that keeps water inside the enclosure.

Tile Sealant and Grout Line Sealing

The joint between tile rows and where walls meet the floor collects grime and goes black over time. We clear out the old material, clean the joint back and apply a fresh seal in a colour that matches the rest of the bathroom. The line looks clean and stays watertight.

Wet Room Sealant

A wet room has no tray or door to stop water spreading. The seal at every wall joint, floor junction and fitting surround has to hold properly. We reseal all these points so the waterproofing works the way it should and water goes to the drain rather than into the walls.

Sink and Basin Sealant

The seal behind a basin or vanity unit is easy to ignore until water starts getting behind it. We replace cracked or lifted sealant around sinks and basins before that happens. It is a small job that stops a much bigger one further down the line.

How the Job Gets Done

Full Removal

Every trace of the old sealant is cut back to the bare surface using purpose-made removal tools. We do not scrape over it or lay anything on top. The joint is cleared fully before we do anything else.

Surface Preparation

The area is dried fully and wiped down to remove any mould residue before the new sealant goes on. This is the step most people miss when they try it themselves. Skipping it is why the mould comes back.

Fresh Application

The new sealant goes on in one continuous bead, pressed to a flat smooth finish and left to set properly. Tiles stay clean. Fittings stay unmarked. The finished line is straight and sits flush with the surrounding surface.

Bathroom Sealant Maintenance Tips

Taking care of the sealant between professional visits keeps it looking good for longer.

Wipe the Sealant Line Dry After Every Use

Water sitting on the sealant line after a shower or bath is what mould needs to grow. A quick wipe along the seal before you leave the bathroom takes ten seconds and makes a real difference over time.

Stay Away From Bleach on the Sealant

Bleach clears the surface mould for a short while but it breaks down the silicone underneath. The sealant softens, loses its grip and starts to lift. Use a product made for bathroom surfaces instead of straight bleach directly on the seal.

Check the Sealant Line Every Few Months

Run your finger along the seal every couple of months. Any section that has gone soft, lifted away from the surface or has a visible gap opening up needs attention before water works its way into the wall behind. A small gap that is dealt with early costs very little. Left alone it causes damage that costs a lot more.

Never Put New Sealant on Top of Old

It will not stick and it will not last. The old surface underneath is dirty and breaking down. New sealant needs a clean dry base to bond to. Laying new over old just delays the job that needs doing properly.

Plan to Replace It Every Few Years

Good sealant does not last forever. After three to five years it starts to harden and lose the flexibility it needs to cope with movement. Replacing it on a regular basis keeps the bathroom waterproof and looking clean without waiting for a failure to force the issue.

Why Choose Us for Bathroom Sealant Work?

Reliable bathroom sealant work with clean finishes, watertight protection, and professional attention to detail.

Complete Sealant Removal

We take the old sealant out completely every time. No shortcuts. No new over old. The surface is always cleaned and dried before anything fresh goes on.

Wide Range of Sealant Colours

We stock white, cream, grey and clear sealant and bring the full range to every job. Most bathroom finishes can be matched on the day. For anything less standard we let you know the closest option before we begin.

Clean & Protected Work Area

Taps, fittings and surrounding tiles are protected throughout the job. Nothing gets marked or damaged. The bathroom is left tidy. There is no mess on the tiles and no excess sealant smeared across the fittings.

Fully Insured Service

All work is fully insured. Indoor jobs are covered the same as any other work we carry out.

Simple, Professional Finish

We keep the job simple. You get a clean line, a watertight seal and a bathroom that looks the way it should.

Frequently Asked Questions

Can black mould on sealant be removed?

Surface mould can be treated but if it has grown into the sealant and behind it the only proper fix is full removal. Treating the surface alone leaves the mould source in place and it comes back within weeks.

How long does new sealant take to cure?

Most bathroom sealants are dry to the touch within a few hours but the area should not be used for 24 hours after application. We tell you the exact curing time for the product used on the day before we leave.

Can you match the sealant to my existing bathroom colour?

Yes. We carry white, cream, grey and clear. For most standard bathrooms one of these will match. We check before starting so there are no surprises on the day.

How long will the new sealant last?

With regular wiping down and without bleach being used directly on it, good quality sealant lasts three to five years. Some lasts longer. The key is keeping the line dry and catching any small gaps before they grow

How long does the job take?

Most bathrooms take one to two hours depending on how much needs resealing. After that the sealant needs 24 hours before the bath or shower is used again. We work around your schedule where we can.

Get a Fresh Seal and a Clean Finish in Manchester

If the sealant in your bathroom has gone black, cracked or started lifting, the longer it is left the more damage builds up behind it. Get in touch with BrightWhite UPVC Cleaning Services today. Call BrightWhite UPVC Cleaning Services on 0161 284 0618 for a bathroom sealant quote. We serve Greater Manchester and all nearby areas and give you a clear price before anything is booked.